E-ACKR-CLR RFID Access Control Keypads

RFID Access Control Keypads

• Outputs controlled by user codes and/or EM cards.
  
  • E-ACKR-WDB-CLR:
    
    • Output 1: 5 Amp relay for door strike.
    • Output 2: 1 Amp relay for other control applications.
    • Output 3: 24VDC/100 mA sink open collector output for other control applications.
    
    
  • E-ACKR-CLR:
    
    • Output 1: 5 Amp relay for door strike.
    • Output 2: 1 Amp relay for other control applications.
    
    
  
  
• Normally closed and normally open dry contacts for all output relays.
• Operate with fail-safe or fail-secure locking device.
• Open collector outputs for Duress, Alarm/Key Active and Inter-lock functions.
• Extremely long programmable timers for output relays.
• 24 bit standard Wiegand data on reading of EM cards/keyfobs.
• 34 bit Wiegand data output on user code entry.
• Door open announcer.
• LED indicators for operation and system statuses.
• Door automatically re-locks after valid access to prevent "tailgate entry".
• E-ACKR-WDB-CLR:
  
  • One Door Bell relay contact (normally open).
  • Weatherproof (IP-55).
  
  
• 50 visitor codes programmable for one time use or a duration of time.
• User Codes:
  
  • E-ACKR-WDB-CLR:
    
    • Output 1: 1,000 user codes and 50 duress codes.
    • Output 2 & 3: 100 user codes and 10 duress codes each.
    
    
  • E-ACKR-CLR:
    
    • Output 1: 1,000 user codes and 50 duress codes.
    • Output 2: 100 user codes and 10 duress codes.
    
    
  
  
• Dual brightness back-lit keyboard.
• Dimensions (WxDxH) in:
  
  • E-ACKR-WDB: 4.61x1.10x4.61 (117x28x117 mm)
  • E-ACKR: 2.83x1.70x4.61 (72x43x117 mm)
  
  
• Includes two EM cards and is compatible with all standard 125 Khz proximity EM cards and keyfobs.
  
  • Additional EM cards (E-RFID-CRD10) and keyfobs (E-RFID-KYFB10) are available in packs of ten.
  
  
• Current consumption: 150mA @ 12VDC.
• Powered by E-2D/5D/16D.
• Regulatory approvals: CE.
• Card Reader Encoder