Dalam situasi di mana suhu dan kelembapan sangat penting, Anda dapat tetap mengikuti kondisi saat ini menggunakan sensor ini. Menggabungkan suhu dan kelembapan ke dalam satu sensor akan membebaskan port sensor cerdas tambahan di unit dasar Anda.
Pemantauan Suhu dan Kelembapan pada satu port sensor
OID SNMP sendiri untuk pengumpulan data melalui jaringan
Pengukuran suhu dari -55ºC – +75ºC
Pengukuran Kelembaban Relatif dari 0% – 100%
Didukung oleh unit dasar, tidak diperlukan daya tambahan
Penyiapannya sederhana dengan fungsi autosense sensorProbe, sensorProbe+, dan securityProbe. Setelah dicolokkan ke port sensor cerdas, unit dasar secara otomatis mendeteksi keberadaan sensor dan mengonfigurasinya untuk Anda.
Suhu dan kelembapan untuk pemantauan pusat data, lokasi terpencil, dan kontrol industri.
Yang perlu Anda lakukan hanyalah menetapkan ambang batas untuk parameter peringatan dan kritis rendah dan tinggi. Fungsi grafik bawaan pada unit dasar memberi Anda pola tren suhu atau kelembapan dari waktu ke waktu.
| Temperature |
|
| Measurement Range |
-55°C to +75°C
-67°F to +167°F |
| Measurement Resolution |
sensorProbe+ series
0.1°C increments
0.2°F increments
securityProbe series
0.5ºC increments
0.9ºF increments
sensorProbe series
1ºC increments
1ºF increments |
| Measurement Accuracy |
sensorProbe+ series and securityProbe series
±0.5°C accuracy from -10°C to +75°C
±0.9°F accuracy from +14°F to +167°F
sensorProbe series
±1°C accuracy from -10°C to +75°C
±1°F accuracy from +14°F to +167°F |
| Humidity |
|
| Measurement range |
0 to 100% Relative humidity |
| Resolution |
1%RH increments, 0.01%RH sensor reading |
| Accuracy at |
At 25°C
Min : ±2%RH
Max : ±5% RH |
| Interface |
|
| Communications cable |
RJ-45 jack to sensor using UTP CAT5e/6 cable |
| Power source |
Powered by the base units. No additional power needed |
| Power Consumption |
Typical 17.25mWatt, 1.45mA |
| Maximum Cable Length |
Run length
THS00 – SPX+ 1000 feet (300 meters) with approved low capacitance shielded UTP cable.
THS00 – SP2+ – 600 feet (180 meters) with approved low capacitance shielded UTP cable.
THS01 – 100ft (30 meters) |
| Sensor type |
Semiconductor, microprocessor controlled |
| Dimensions |
56 x 55 x 33.3 mm |
| Mounting |
DIN rail mounting
Screw mounting |
| Sensor count |
2 |
| Sensor count (NIST2/NIST4) |
3 |
| Important Note |
The fixed one foot type or THS01 are not designed to be extended. If
you need to extend these sensors then you need to use the THS00 (remote
type). We also do not recommend you trying to connect any of our AKCP
sensors including the temperature and dual temp humidity sensors though
patch panels or using the RJ-45 couplers to extend them. Please see the
temperature sensors product manual or FAQ in our knowledge base for more
details regarding this. |
| Compatibility |
THSxx-NIST2 and THSxx-NIST4 compatible with sensorProbe+ series only |
Temperature Transducers